3D Printing

• Quick Start Resources
  • Read before Operating - Eryone ER-20 Quick Start Guide
  • Read before Operating - Prusa Quick Start Guide
  • Read before Operating - Raise 3D E2 Quick Start Guide
  • Read Before Operating - Form 2 Quick Start Guide
  • Read Before Operating - Ender 3 Quick Start Guide
  • Read before Operating - Ender 5 Quick Start
  • Quick Start Material Settings
• The Basics of 3D Printing
  • Welcome
  • Overview
  • Materials
  • Modelling
  • STL Format
  • Printing
• Generating the G-Code
  • Eryone ER-20
  • Prusa i3 MK3S+
• Preparing Printer
  • Changing and Inserting Material
  • Printing
• Advanced Workflow
  • Large Overhang/ Support Material
  • Bed Adhesion
  • No Large Flat Surface to Start Print From
  • Infill Percentage
  • Thin Wall Printing Settings
  • Multi-Colour/Material Prints with the Eryone ER-20
  • Multi-Colour/Material Prints with the Prusa
  • Raise3D E2
  • Eryone ER-20 Calibration
  • Ender 5 Leveling Guide
• Case Studies
  • Building the Supermarine Spitfire Mk IX Plane
    • Introduction
    • History
    • Research
    • Thin Wall Printing
    • Bed Adhesion For Thin Wall Printing
    • Gluing Together Plane
• Resin Printing
  • Introduction to Resin Printing
    • Hazard
    • Disposal
    • Required Tools and Equipment
  • Setting Up the Form 2
    • Levelling
    • Inserting Resin tank
    • Inserting Resin
    • Best Practice
  • Preform Slicer
    • One Click Print
    • Case Against One Click Printing
    • Uploading and Starting Your Part
  • Post Processing
    • Washing
    • Support Removal
    • Curing
    • Sanding
  • Advanced Resin Workflow
    • Supporting Your Part
    • Form 2 Wiper
    • Print Angle
    • Overhangs and Islands
    • Lowest Point
    • Intersection Integrity
    • Suction
  • Resin Troubleshooting
    • Residue in the Resin
    • Overfilling the Build Platform
    • Printer is Not Level
    • Unsupported Minima or Islands
    • Hollowing
    • Hardware Maintenance
• Prusa Slicer Printer Configurations